RF Series
  • BNC Type
  • DIN 1.0/2.3
  • DIN 1.6/5.6
  • DIN 4.3/10
  • DIN 7/16
  • F Type
  • Fakra
  • HSD
  • MCX Type
  • MMCX Type
  • N Type
  • PAL Type
  • QMA Type
  • SMA Type
  • SMB Type
  • SMZ Type
  • SSMA Type
  • SSMB Type
  • TNC Type
  • TS9 Type
  • UHF Type
  • 1.0mm
  • 1.85mm
  • 2.4mm
  • 2.92mm
  • 3.5mm
  • BMA
  • SMP
  • SMP Type
  • SSMP Type
Connector Type
  • Jack
  • Plug
  • M12 1 Plug + 2 Jack
  • M12 1 Plug + 3 Jack
  • M12 1 Plug + 5 Jack
  • Casing
  • QSFP28 to QSFP28
  • QSFP56 to QSFP56
  • QSFPDD to QSFPDD
  • Receptacle
Contact Type
  • Female Pin
  • Male Pin
  • Female
  • Male
Orientation
  • Right Angle
  • Straight
  • T Type
Pins
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 12
  • 14
  • 19
  • 24
  • 32
Impedance
  • 100 ohm
  • 50 ohm
  • 75 ohm
  • 50 Ω
  • 50 Ω
  • 50Ω
  • 75Ω
Mounting Type
  • Cable Mount
  • Panel Mount
  • Cable Type
Mounting Feature
  • 2 Hole Flange
  • 4 Hole Flange
  • Bulkhead
  • Edge Mount
  • Offset Type
  • SMT
  • Through Hole
  • -
  • Flange
Fastening Type
  • 1/4-36 Threaded
  • 3/8-32 Threaded
  • 5/8-24 Threaded
  • Bayonet
  • Push-On
  • Push-Pull
  • Snap On
  • Threaded

TS9 Connector

The TS-9 (or TS9) is an uncommon RF coaxial connector used in cellular devices such as 3G and 4G mobile broadband modems to support the connection of external antennas. TS-9 connectors are not designed and manufactured to follow any defined international standards, nor do they follow proprietary specifications.

The TS9 female connector consists of a very simple round brass housing with an outside diameter of 3.5 mm. The connector is typically attached to the PCB via surface mount or end-mount. The connector is most commonly found on wireless broadband devices manufactured by Netgear and Sierra Wireless.

TS9 male connectors are not manufactured in a controlled manner. However, they are identified by a 3.5 mm ID and a 3.8 mm OD. Male connectors are primarily used to interconnect coaxial cables but are occasionally used for small direct connections to external antennas.

Cable Type: RG405
Connector Type: Plug
Contact Material: Brass
Contact Type: Male Pin
Fastening Type: Push-Pull
Frequency - Max: 6GHz
Impedance: 50 ohm
Shell Finish: Gold Plated
Shell Material: Copper Alloy
Shield Termination: Solder
Cable Type: RG316
Connector Type: Plug
Contact Material: Brass
Contact Type: Male Pin
Fastening Type: Snap On
Frequency - Max: 4GHz
Impedance: 50 ohm
Shell Finish: Nickel Plated
Shell Material: Copper Alloy
Shield Termination: Crimp