Filter
RF Series
  • BNC Type
  • DIN 1.0/2.3
  • DIN 1.6/5.6
  • DIN 4.3/10
  • DIN 7/16
  • F Type
  • Fakra
  • HSD
  • MCX Type
  • MMCX Type
  • N Type
  • PAL Type
  • QMA Type
  • SMA Type
  • SMB Type
  • SMZ Type
  • SSMA Type
  • SSMB Type
  • TNC Type
  • TS9 Type
  • UHF Type
  • 1.0mm
  • 1.85mm
  • 2.4mm
  • 2.92mm
  • 3.5mm
  • BMA
  • SMP
  • SMP Type
  • SSMP Type
Connector Type
  • Jack
  • Plug
  • M12 1 Plug + 2 Jack
  • M12 1 Plug + 3 Jack
  • M12 1 Plug + 5 Jack
  • Casing
  • QSFP28 to QSFP28
  • QSFP56 to QSFP56
  • QSFPDD to QSFPDD
  • Receptacle
Contact Type
  • Female Pin
  • Male Pin
  • Female
  • Male
Orientation
  • Right Angle
  • Straight
  • T Type
Pins
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 12
  • 14
  • 19
  • 24
  • 32
Impedance
  • 100 ohm
  • 50 ohm
  • 75 ohm
  • 50 Ω
  • 50 Ω
  • 50Ω
  • 75Ω
Mounting Type
  • Cable Mount
  • Panel Mount
  • Cable Type
Mounting Feature
  • 2 Hole Flange
  • 4 Hole Flange
  • Bulkhead
  • Edge Mount
  • Offset Type
  • SMT
  • Through Hole
  • -
  • Flange
Fastening Type
  • 1/4-36 Threaded
  • 3/8-32 Threaded
  • 5/8-24 Threaded
  • Bayonet
  • Push-On
  • Push-Pull
  • Snap On
  • Threaded

UHF Connector

UHF connector is designed in World War II or earlier, and invented in the 1930s by Amphenol engineer Edward Clarke Quackenbush for use in the radio industry. The connector reliably carries signals at frequencies up to 100 MHz.

The coupling shell has a 5⁄8 inch 24 TPI UNEF standard thread. The most popular cable plug and corresponding chassis-mount socket carry the old Signal Corps nomenclatures PL-259 (plug) and SO-239 (socket).

The UHF connector is a name for a threaded RF connector. UHF coax connectors reliably carry signals at frequencies up to 100 MHz with thread coupling. Widely used for Antennas, Military, Public Address Systems, Low-frequency applications, etc.

Quick View

UHF Connector Right Angle Jack Crimp Cable Type Bulkhead – RHT-630-0116

Connector Type: Jack
Contact Material: Brass
Contact Type: Female Pin
Fastening Type: Threaded
Frequency - Max: 300MHz
Impedance: 50 ohm
Shell Finish: Nickel Plated
Shell Material: Copper Alloy
Shield Termination: Crimp
Quick View

UHF Connector Right Angle Jack Crimp Panel Mount Bulkhead – RHT-630-0101

Connector Type: Jack
Contact Material: Brass
Contact Type: Female Pin
Fastening Type: Threaded
Frequency - Max: 300MHz
Impedance: 50 ohm
Shell Finish: Nickel Plated
Shell Material: Copper Alloy
Shield Termination: Crimp
Quick View

UHF Connector Right Angle Jack Crimp Panel Mount Bulkhead – RHT-630-0134

Connector Type: Jack
Contact Material: Brass
Contact Type: Female Pin
Fastening Type: Threaded
Frequency - Max: 300MHz
Impedance: 50 ohm
Shell Finish: Nickel Plated
Shell Material: Copper Alloy
Shield Termination: Crimp
Quick View

UHF Connector Right Angle Male Crimp Cable Type – RHT-630-0110

Connector Type: Plug
Contact Material: Brass
Contact Type: Male Pin
Fastening Type: Threaded
Frequency - Max: 300MHz
Impedance: 50 ohm
Shell Finish: Nickel Plated
Shell Material: Copper Alloy
Shield Termination: Crimp
Quick View

UHF Connector Right Angle Male Crimp Cable Type – RHT-630-0114

Connector Type: Plug
Contact Material: Brass
Contact Type: Male Pin
Fastening Type: Threaded
Frequency - Max: 300MHz
Impedance: 50 ohm
Shell Finish: Nickel Plated
Shell Material: Copper Alloy
Shield Termination: Crimp
Quick View

UHF Connector Right Angle Male Crimp Cable Type – RHT-630-0119

Connector Type: Plug
Contact Material: Brass
Contact Type: Male Pin
Fastening Type: Threaded
Frequency - Max: 300MHz
Impedance: 50 ohm
Shell Finish: Nickel Plated
Shell Material: Copper Alloy
Shield Termination: Crimp
Quick View

UHF Connector Right Angle Male Crimp Type For RG179 Cable 50 Ohm – RHT-630-0108

Cable Type: RG179
Connector Type: Plug
Contact Material: Brass
Contact Type: Male Pin
Fastening Type: Threaded
Frequency - Max: 300MHz
Impedance: 50 ohm
Shell Finish: Nickel Plated
Shell Material: Copper Alloy
Shield Termination: Crimp
Quick View

UHF Connector Straigh Jack Clamp 4 Hole Flange For RG142 Cable – RHT-630-0106

Connector Type: Jack
Contact Material: Brass
Contact Type: Female Pin
Fastening Type: Threaded
Frequency - Max: 300MHz
Impedance: 50 ohm
Shell Finish: Nickel Plated
Shell Material: Copper Alloy
Shield Termination: Clamp
Quick View

UHF Connector Straight Jack Clamp Cable Type – RHT-630-0105

Connector Type: Jack
Contact Material: Brass
Contact Type: Female Pin
Fastening Type: Threaded
Frequency - Max: 300MHz
Impedance: 50 ohm
Shell Finish: Nickel Plated
Shell Material: Copper Alloy
Shield Termination: Clamp
Quick View

UHF Connector Straight Jack Clamp Cable Type – RHT-630-0118

Connector Type: Jack
Contact Material: Brass
Contact Type: Female Pin
Fastening Type: Threaded
Frequency - Max: 300MHz
Impedance: 50 ohm
Shell Finish: Nickel Plated
Shell Material: Copper Alloy
Shield Termination: Clamp
Quick View

UHF Connector Straight Jack Clamp Cable Type – RHT-630-0124

Connector Type: Jack
Contact Material: Brass
Contact Type: Female Pin
Fastening Type: Threaded
Frequency - Max: 300MHz
Impedance: 50 ohm
Shell Finish: Nickel Plated
Shell Material: Copper Alloy
Shield Termination: Clamp
Quick View

UHF Connector Straight Jack Clamp Cable Type – RHT-630-0126

Connector Type: Jack
Contact Material: Brass
Contact Type: Female Pin
Fastening Type: Threaded
Frequency - Max: 300MHz
Impedance: 50 ohm
Shell Finish: Nickel Plated
Shell Material: Copper Alloy
Shield Termination: Clamp